Compact Monitor II

IMF Compact Monitor 2



Description

The CM2 is a two-way "in-line" resistive reflex system employing our latest drive units. The heavy and rigidly braced cabinet is finished in high-quality American walnut, with the option of light beechwood trim top and bottom (as illustrated). The flat front baffle, devoid of grille framing, eliminates edge defractions that cause the image blurring frequently exhibited by other small loudspeakers.

Acoustically transparent self-coloured dark brown foam is used to cover the front of the speaker and complements the veneer.

The carefully engineered crossover supplies high frequencies to the one-inch soft dome tweeter, which is smoothly crossed over with the eight-inch laminated mid-range / bass driver. Special emphasis has been given to the phase-coherence, providing a performance that is tight and crisp throughout the audio spectrum. From the well-extended bass region, through the mid-range, the response continues to well beyond audibility.

The result is a small and efficient loudspeaker with superb imagery and
power handling capacity that may truly be called a "Monitor".

SPECIFICATION

Dimensions
480 x 255 x 275 mm (18:1/4" x 1W x 10 3/4") wide

Drive Units
200 mm (8") Bass/Mid - laminated dome    25 mm (1") Tweeter - soft dome

Crossover Frequency
3 kHz

Frequency Response
34 Hz to beyond audibility

Efficiency
1 m Pink Noise - 86 dB at 1 watt

Matching Impedance
8 ohms nominal

Recommended Amplifier Power
10 watts to 100 watts per channel RMS

Net Weight
13.4 kilos (29.48 Ibs.) (pair)

Gross Weight
17.0 kilos (37.40 Ibs.) (pair)

Cabinet Finish
Walnut Veneer - optional light beechwood trim

Subject to alteration without notice

IMF ELECTRONICS, INC. 5226 State Street
Saginaw, Michigan 48603 Tel (517) 790-2121 Telex 227461

IMF ELECTRONICS LTD Westbourne Street High Wycombe
Buckinghamshire England HP1 1 2PZ Tel (0494) 35576 Telex 83545




Comments