IMF Compact Monitor 3
Description
The CM3 represents the latest development of three-way "in-line" configuration and is intended for monitoring purposes where accurate phase-coherent response and imagery are essential.
The complex and carefully designed crossover ensures these parameters are maintained throughout the very wide frequency response of this speaker, which has such moderate dimensions. Our one-inch soft dome tweeter extends the high frequency range well above audibilty. The plastic-coned mid-range and bass units have their rearward radiation absorbed in separate and tapered cabinet sections, which also serve to produce an enclosure that is both rigid and free of spurious resonances.
Of modem design, the cabinet is finished in the highest quality American walnut veneer with the option of light beechwood trim top and bottom (as illustrated). The self-coloured dark brown foam that covers the front of the cabinet is acoustically transparent and complements the attractive veneer. The flat baffle, devoid of grille framing, eliminates image smear caused by defractions.
The accuracy of this remarkable loudspeaker truly warrants the term "Monitor".
SPECIFICATION
Dimensions570 x 280 x 300 mm (24" x 1F' x 113/4") wide
Drive Units200 mm (8") Bass unit - plastic cone; 100 mm (4") Mid-range - plastic cone; 25 mm (1") Tweeter - soft dome
Crossover Frequencies375 Hz and 3 kHz
Frequency Response29 Hz to beyond audibility
Efficiency1 m Pink Noise - 84 dB at 1 watt
Matching Impedance8 ohms nominal
Recommended Amplifier Power20 watts to 150 watts per channel
RMS Net Weight26.5 kilos (58.30 Ibs.) (pair)
Gross Weight35.0 kilos (77 Ibs.) (pair)
Cabinet FinishWalnut Veneer - optional light beechwood trim
Subject to alteration without notice
IMF ELECTRONICS, INC. 5226 State Street
Saginaw, Michigan 48603 Tel (517) 790-2121 Telex 227461
IMF ELECTRONICS LTD Westbourne Street High Wycombe
Buckinghamshire England HP1 1 2PZ Tel (0494) 35576 Telex 83545
Pictures