IMF MCR 2A
Both professionals and audiophiles require a no compromise loudspeaker that produces precise stereo imagery and the widest possible frequency response for an enclosure of minimum dimensions.
This has been achieved with the MCR 2A, which is equally at home in either domestic environment or studio control-room. Additionally, being phase compatible with our larger loudspeakers, it is ideally suited for use in a four-speaker arrangement. This carefully integrated design employs the same ferro-fluid damped tweeter and mid/bass unit that are used in our Professional Monitor loudspeakers. The sophisticated crossover configuration is also a derivative of the Professional series and ensures a smooth frequency response to well above audibility, whilst maintaining an even impedance characteristic.
Finished in the finest quality American Walnut, the heavily constructed and damped enclosures are supplied with brown foam fronts which are specially designed to be acoustically transparent. Edge defraction effects are thus effectively eliminated, minimising colouration.
The fact that this is the smallest loudspeaker we have ever produced confirms our opinion that, in the MCR 2A, we have made a most significant breakthrough in performance. Whether used professionally or in the home, its accuracy has no rival.
380 x 230 x 230 mm (14 7/8" x 9" x 9") wide
130 mm (Y) Bass/Mid - engineered polymer cone; 20 mm (3/4") Tweeter - chemical dome: ferro-fluid damped
65 Hz to 40 kHz
1 m Pink Noise - 83 dB at one watt
8 ohms nominal
Recommended Amplifier Power
Not less than 20 watts per channel RMS
11.6 kilos (25.5 Ibs.) (pair)
15.5 kilos (34.1 Ibs.) (pair)
American Walnut Veneer
Subject to alteration without notice
IMF ELECTRONICS, INC. 5226 State Street
Saginaw, Michigan 48603 Tel (517) 790-2121 Telex 227461
IMF ELECTRONICS LTD Westbourne Street High Wycombe
Buckinghamshire England HP1 1 2PZ Tel (0494) 35576 Telex 83545